Adjustable Power FPV Transmitter for Racing Drones

Feature: 1. Transmitting Power: Transmitting power is 25 mW, 200 mW, 500mW and off (PitMode) adjustable. 5.8G working frequency, 40CH working channel. 2. Supported Function: Support for Betaflight, for Cleanflight control OSD configuration image transmission parameters. 3. Without Interference: interference power on and channel switching, no interference to other users. Fit for FPV traversing machine. 4. Flexible Installation: LED light display, light weight design. Reserved pad, 20mm / 0.8in hole position, flexible installation. 5. Smaller Current: Working current (12V) is 75mA (25mW), 110mA (200mW), 200mA (500mW), working voltage is DC 5‑24V. Specification: Item Type: FPV Transmitter Material: Electronic Components Color: Red Weight: Approx. 5g / 0.2oz Working Frequency: 5.8G Working Channel: 40CH Transmitting Power: 25mW/200 mW/500mW Working Voltage: DC 5-24V Working Current (12V): 75mA (25mW)/110mA (200mW)/200mA (500mW) Hole Distance: Approx. 20x20mm / 0.8x0.8in Product Size: Approx. 26x26mm / 1.0x1.0in Application: FPV Traversing Machine Package List: 1 x Transmitter 1 x Connection Cable How to use: 1.LED Indication: The red LED indicates the state of working mode or the item when setting the VTX(flashing 1 time means selecting the channels, flashing 2 times means selecting the bands, flashing 3 times means selecting the power levels). The blue LED indicates the state of Pitmode or the value of item when setting the VTX( e.g. when selecting the channels, 3 times of flashing means channel 3. When selecting the bands, 3 times of flashing means band C. As for the item of power levels,3 times of flashing means at the power level of 500mW) 2.Working Mode Indication: After powering up, the red and blue LEDs will signal the following three items of VTX in turn: channel, band and power level(the flashing times of the red and blue LEDs indicate the item and the value respectively). After that, the LEDs indicate the working modes. Normal: The red and blue LED are on. Pitmode: The red LED is on and blue LED is off. 3.Setting: Press and hold the C button until the red LED flash 1 time which means the item of channel selecting, then