Attension: when first time to use this ESC and motor replacement or you are not skillful or professional to play RC Plane Quadcopter Helicopter , Plese follow these steps to set your throttle stroke calibration.otherwise incorrect operating will cause ESC hot ,smoke or burn.
How to set Throttle stroke calibration:
1.Connect the ESC with motor ,another end connect with receiver.
2.Turn on the remote controller and push the throttle to the highest point
3.Plug the ESC into batteries
4.There has double click sound (the highest point of the throttle confirm)
5.After get the click sound take the throttle stick to the lowest point
6.Confirm the three click sound† that means OK.
Note:.The three lines of the brushless ESC can be connected at will. If the steering is not correct, you can adjust any two of them.
A2212 2200kv Motor Specification:
††† KV: 2200
††† Ri(M ?): 0.033
††† Battery: 2-3Li-Po
††† Max Power: 342W
††† Test Prop: 7x3/7x4
††† Motor Size: 27.5x38mm/1.08''x1.5''
††† Shaft Diameter: 3.17mm/0.12''
30A Brushless ESC Specification:
††† BEC: 3A
††† Constant Current: 30A.
††† Max Current: 45A (less than 12s).
††† Low-voltage Cutoff: Auto detect.
††† Input: 2-3 LiPo or 5/10 NiMH.
†1 X A2212 2200kv Brushless Motor
†1 X 30A Brushless ESC
†2 X Propeller
†1 X Macroporous pulp(fit for Bullet)
†1 X Holes pulp(fit for Pulp protection
Name: Brushless Motor; Model : A2212-6; KV : 2200RPM/V
Motor Part Size : 27.5 x 38mm/ 1.08" x 1.8"(L*D); Shaft Size : 3.17mm/ 0.12"
Max Efficiency: 80% ; Fit fŁr ESC: 30A.
Max Current: 45A (less than 12s).
Suitable for RC Glider Quadcopter Helicopter Aircraft Copter Multi-copter ?